HP-T163E / Glass filament fabric Silane - Twill

3,36 EUR
(incl. 19% Tax excl. Shipping costs)
 
Print product data sheet
Product No.: HP-T163E
Delivery time: ca. 1-2 Days ca. 1-2 Days
Tell a friend
HP-T163E / Glass filament fabric Silane - Twill
HP-T163E / Glass filament fabric Silane - Twill
Sliding-scale prices
1-4m²
3,36 EUR
5-9m²
3,13 EUR
10-24m²
2,90 EUR
25-49m²
2,46 EUR
50-99m²
1,90 EUR
> 100m²
1,59 EUR

Glass filament fabric Silane
weight: 166g/m²
weave: twill 2/2
widht: 100cm
 
Calculated data for hand laminate with 35 volume percent fibres
Resin consumption: 136 g/m²
laminate thickness: 0,18 mm
laminate weight: 302 g/m²
 
Areas of application:
design of models-, sport equipment,
boat-, tank-, and mould making, car-parts
 
 
****
Information of delivery: Delivery up to 2,5m² only folded up. 
                                 More than 3m² only on roll.

 

X Wish list
Order quantity has to be devisible by 0,1 without decimal places!
shipping weight per piece: 0.16 kg
Customers who bought this product bought also the following products:
HP-P21LP-1 / Polyester resin based on orthophtalic acid

1kg Polyester resin based on orthophtalic acid

set of two components: 1kg resin + 20g MEKP-hardener

Waxed for top or finish uses

 

9,90 EUR
(incl. 19% Tax excl. Shipping costs)
1 x 'HP-P21LP-1 / Polyester resin based on orthophtalic acid' order
HP-MP600E / Textile glass mat

weight: 600g/m²
widht: 125cm

4,50 EUR
(incl. 19% Tax excl. Shipping costs)
1 x 'HP-MP600E / Textile glass mat' order
HP-E28L-2800 / Epoxy Laminating Resin System

2800g Epoxy-laminate resin system

set of two components: 2000g resin + 800g hardener

 

The Epoxy Laminating Resin System HP-E28L is an unfilled, low-viscosity combination of resin and hardener with working time (pot life) about 30 minutes.

 

 

36,90 EUR
(incl. 19% Tax excl. Shipping costs)
1 x 'HP-E28L-2800 / Epoxy Laminating Resin System' order
HP-T240/125C / Carbon Fabric - Twill

weight: 240g/m²
weave: twill 2/2
widht:  125cm

37,49 EUR
(incl. 19% Tax excl. Shipping costs)
1 x 'HP-T240/125C / Carbon Fabric - Twill' order
HP-E25D-4000 / Epoxy Covering Resin System (Topcoat)

4000g Epoxy Covering Resin System (Topcoat)

set of two components: 2500g resin + 1500g hardener

The Epoxy Laminating Resin System HP-E25D is an unfilled, low-viscosity combination
of resin and hardener with higher UV-resistance.

Processing time (pot life): about 25 minutes.

58,90 EUR
(incl. 19% Tax excl. Shipping costs)
1 x 'HP-E25D-4000 / Epoxy Covering Resin System (Topcoat)' order