HP-T110E / Glass filament fabric Silane - Twill

3,46 EUR
(incl. 19% Tax excl. Shipping costs)
 
Print product data sheet
Product No.: HP-T110E
Delivery time: ca. 1-2 Days ca. 1-2 Days
Tell a friend
HP-T110E / Glass filament fabric Silane - Twill
HP-T110E / Glass filament fabric Silane - Twill
Sliding-scale prices
1-4m²
3,46 EUR
5-9m²
3,24 EUR
10-24m²
3,00 EUR
25-49m²
2,53 EUR
50-99m²
1,96 EUR
> 100m²
1,68 EUR

Glass filament fabric Silane
weight: 105g/m²
weave: twill 2/2
widht: 100cm
 
Calculated data for hand laminate with 35 volume percent fibres
Resin consumption: 86 g/m²
laminate thickness: 0,12 mm
laminate weight: 191 g/m²
 
Areas of application:
sandwich components, design of models,
thin coating, boat building
 
 
****
Information of delivery: Delivery up to 2,5m² only folded up. 
                                 More than 3m² only on roll.

 

X Wish list
Order quantity has to be devisible by 0,1 without decimal places!
shipping weight per piece: 0.11 kg
Customers who bought this product bought also the following products:
HP-E56L-2800 / Epoxy Industrial Laminating Resin System

2800g Epoxy Industrial Laminating Resin System

set of two components: 2000g resin + 800g hardener

 

The Epoxy Laminating Resin System HP-E56L is an unfilled, low-viscosity combination of resin and hardener with working time (pot life) about 55 minutes.

42,90 EUR
(incl. 19% Tax excl. Shipping costs)
1 x 'HP-E56L-2800 / Epoxy Industrial Laminating Resin System' order
HP-T195C / Carbon Fabric - Twill

weight: 195g/m²
weave:  twill 2/2
widht:   100cm

30,35 EUR
(incl. 19% Tax excl. Shipping costs)
1 x 'HP-T195C / Carbon Fabric - Twill' order
HP-L1057  Plastic Valve DN45

For plastic canister from 2 to 10ltr

3,99 EUR
(incl. 19% Tax excl. Shipping costs)
1 x 'HP-L1057  Plastic Valve DN45' order
HP-P160C / Carbon Fabric - Plain

weight: 160g/m²
weave: plain
widht:   100cm

26,78 EUR
(incl. 19% Tax excl. Shipping costs)
1 x 'HP-P160C / Carbon Fabric - Plain' order
750g HP-IMC- / In-Mould coating
Set of two components: 500g resin + 250g hardener.

HP-IMC is a two component polyurethane in-mould-coating

with a long time adhesion to following epoxy layers.

23,90 EUR
(incl. 19% Tax excl. Shipping costs)
1 x '750g HP-IMC- / In-Mould coating' order